Having your own hot tub, spa bath, or whirlpool is quite an investment for most people. You naturally expect many years of good use for the amount of money you’ve paid. Therefore, you must know how to maintain and clean your hot tub or whirlpool properly. In this article, you can read what is involved.

It is recommended that you thoroughly clean your hot tub every season to enjoy it for longer. It doesn’t have to take a lot of work. Below, we provide a step-by-step guide on what you need to do.

Cleaning your hot tub step 1: Drain the bath

To start cleaning your bubble bath, you first need to drain it. Next, fill the tub with new water up to around four inches/10 cm above the highest jets.

Cleaning your hot tub step 2: Clean the pipes

Add a special jet and pipe cleaner to the water. Let the tub bubble for about fifteen minutes. This cleans and disinfects the pipes. Before doing so, make sure that you turn off the air supply to the tub completely so that only water flows through the pipes.

Cleaning your hot tub step 3: Rinse again

Drain the bath once again. Then remove any remaining dirt and refill the tub with water up to roughly four inches above the highest jets. Activate the jets for about ten minutes to flush the pipes once more.

Cleaning your hot tub step 4: Cleaning the tub

Drain the tub again and clean it well with a special shell polish. By using this cleaning agent, the tub will look great and remain in good condition.

Cleaning your hot tub step 5: Fill the tub

When the tub is bright and shiny again, you can fill it completely with warm water. There is nothing left to do but relax in a refreshing bubble bath. Enjoy!